Sharp LC-26SH330E EEAutomatically switch the TV to standby Sleep timer, Use subtitles

TV menu

EEAutomatically switch the TV to standby (Sleep timer)

Sleep timer switches the TV to standby after a defined period of time.

1.Press MENU on the remote control and select Features ≥ Time.

2.Press OK or ≥ to enter Time.

3.Press <> to select Sleep Timer.

4.Press ≤≥ to select the period of time before TV enters to standby.

5.Follow the on-screen instructions to exit.

NOTE

•When you press any button on the remote control with less than three minutes left in the countdown, Sleep timer will be automatically canceled.

SCART

You can set the specific type of signal going into SCART terminal. Check the signal output type of the DVD or other equipment connected to the SCART teminal of the TV, referring to manufacturer’s instruction of those devices. Select the correct input signal setting for SCART.

NOTE

•This option is available only when the input source is

SCART.

Use subtitles

You can enable subtitles for each TV channel. Subtitles are broadcasted via teletext or DVB-T digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language.

EESet analogue subtitles

1.Press MENU on the remote control and select Features > Subtitle.

2.Press OK or ≥ to enter Subtitle.

3.Select Analogue Subtitle.

4.Press ≤≥ to select On to display subtitle always or On During Mute to display subtitles only when audio is muted. Select Off to close subtitles.

5.Follow the on-screen instructions to exit.

EESelect a subtitle language on digital TV channels

When you select a subtitle language on a digital TV channel as described below, the preferred subtitle language set in the TV menu is temporarily overruled.

1.Press MENU on the remote control and select Features > Subtitle.

2.Press OK or ≥ to enter Subtitle.

3.Press <> to select 1st Subtitle or 2nd Subtitle.

4.Highlight your selection and press ≤≥ to select a subtitle language.

5.Follow the on-screen instructions to exit.

NOTE

•If your selected subtitle language is not broadcast, the default language subtitle will be displayed.

•If the 1st Subtitle language you selected is not available, the 2nd Subtitle language will be displayed.

EESelect Hearing impaired subtitle

When watching channels with hearing impaired service, you can enable the subtitle commentary for the hearing handicapped. For digital channels only.

1.Press MENU on the remote control and select Features ≥ Subtitle.

2.Press OK or ≥ to enter Subtitle.

3.Press <> to select Subtitle Type.

4.Press ≤≥ to select Hearing impaired as your subtitle type.

5.Follow the on-screen instructions to exit.

Teletext language

You can select Teletext Language when the TV receives Teletext signals broadcast by a TV network. (See page 11.)

Common Interface

This function enables you to watch encrypted services (pay services). (See page 25.)

NOTE

•This functions may not work depending upon the country broadcasting circumstances.

18