P74500ea_F8T061_man.qxd 2/6/04 3:49 PM Page 14
Pairing to a Bluetooth Technology-Enabled Phone
7.Select “Belkin Headset” to initiate the pairing.
8.Enter the passkey or pin “0000” (4 zeros). You should see the LED lights switch from flashing blue/red to flashing blue every three seconds.
9.Your Headset is now ready to use.
Pairing to a Bluetooth Technology-Enabled Phone
Pairing Process for Nokia 3650 and N-Gage
1.Ensure that your Headset is turned off.
2.Press and hold down the talk button. After approximately eight seconds, the blue light will flash five times, indicating the Headset is powered on. Do not release the button until you see an alternating blue and red light. This indicates the Headset is in pairing mode.
3.Select “Menu” and then go to the “Tools” folder.
4.Select “Bluetooth”.
5.Make sure your Bluetooth capability is turned ON.
6.Scroll to the “Paired Devices” tab and select “Options”.
7.Under “Options” select “New Paired Devices”.
1
2
3
4
5
section
14
