HELPFUL HINTS
1.Make sure the data cable is NOT plugged in until CellSync software is installed.
2.Disregard any signature screens by clicking “OK”.
3.Make sure your phone has been set up to be
4.LG phones will turn off and on when the read and write function is being used. For LG 5350 phones, make sure that your phone settings are correct.
•Connection: Always (This will change every time you power the phone off and on.)
•Method:
•Port Speed: 230400bps
Refer to the installation guide for Windows 98 and Me for further instructions.
5.If you get a communication error, check to see if your phone is connected to the computer with the data cable provided and that your phone is powered on.
6.You must obtain your user name and password before using the CellSync Manager.
7.For the Sanyo
How to obtain your user name and password:
1.Go to www.sprintpcs.com.
2.Under the “Customer
3.In the “Customer
39