Belkin F9K1107 8820-00920 Rev. A00 user manual Symptoms, Using Your Router, Setup steps

USING YOUR ROUTER

Restoring the Router to Default

Settings Using the Web Interface

Symptoms

You need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings.

Setup steps

1.Open a web browser on the computer.

2.In the address bar of the web browser, type “http://192.168.2.1”.

3.Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit.”

4.Click on “Restore Factory Defaults” in the left-hand column under the “Utilities” heading.

5. Click on the “Restore Defaults” button.

10