P73050/F1D092AM/man.qxd 4/28/00 1:43 PM Page 11
Troubleshooting (continued)
En
Mouse: (continued)
•Make sure the mouse is a true PS/2 mouse. A combination mouse will work just as long as it is set for PS/2 mode with the correct adapter. A serial mouse with a combo mouse adapter will NOT work.
•Check to make sure that the power adapter is plugged in and is working properly. It must be 9VDC, 500mA minimum.
Q:When I switch from one port to another, mouse movement is completely erratic. What do I do?
A:• Make sure you do not have more than one mouse driver. Make sure that the driver is either for a Standard PS/2 or Microsoft®- compatible PS/2 mouse. Try to obtain the latest version from your hardware manufacturer.
•If you are using specialized mice such as cordless mice, scrolling mice or mice with more than two operational buttons, try using generic PS/2 mouse drivers.
•Make sure you do not have any mouse drivers loaded in your config.sys or autoexec.bat files.
•Avoid moving the mouse or pressing the mouse buttons when switching ports on the OmniCube™.
•You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from the front of the OmniCube™ for about
•Make sure you followed the installation procedure closely. Before booting up the PCs, the OmniCube™ must be powered with its power supply. But before attaching the OmniCube™ power supply, the keyboard and mouse MUST be connected first.
11
