Belkin user manual Back of OmniCube F2N036-XX

Repeat steps 4-6 for the second computer.

P73050/F1D092AM/man.qxd 4/28/00 1:43 PM Page 8

Hardware Installation (continued)

6. Connect the first computer's keyboard cable to the OmniCube™. Using another PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 keyboard port on the computer, and the other end to the PC1 keyboard port on the back of the OmniCube™. If your computer has an AT-style keyboard port, you will need a PS/2-AT keyboard adapter (Belkin Part# F2N018).

Back of OmniCube™

F2N036-XX

7. Double check all the connections. Make sure the keyboard and mouse cables go to the correct ports.

8.

9. Attach the power supply to the power supply connector at the back of the OmniCube™. Plug this into any available AC outlet. This must be done last. You should see the LED for Port 1 on the front panel blink, and hear a beep. Power up your monitor.

10. You can now power up both computers simultaneously. The first computer will show up on the monitor. Check to see if the keyboard, mouse and monitor work. If this is okay, press the SELECT button and check the functionality of the second computer. If you find any errors, double check all the cable connections.

8