signal’s range very quickly and receive only a brief alert. Although many times the probable source of the false signal can be identified (supermarket, bank, commercial building, etc.), caution is advised until the source can be confirmed. The X band alert pattern caused by a
Laser Alerts
When Laser is detected, a flashing “L” will appear in the Digital Display.
If a vehicle is a long distance from the source of Laser pulses, fewer pulses will generally be received. The closer the vehicle is to the source of Laser pulses, the greater the likelihood of receiving a steady stream of Laser pulses. The reason for this is the aiming stability of the Laser gun and the fact that it is impossible to hold the gun absolutely still. Any movement of the gun results in motion of the beam at the target. The further the target, the greater the displacement of the beam and the shorter the dwell time of the beam at the target point. There- fore, there is the possibility of receiving only a few Laser pulses.
Due to these characteristics, all Laser alerts received from your unit should be taken seriously.
Whenever your express unit detects signals from the Interceptor
