Beltronics Beltronics Express Nearest the windshield, Cup to secure it in place,  windshield

.	Slide the visor bracket onto the top of the detector until it
	snaps into place. Clip the detector to the edge of the sun visor
	nearest the windshield.

Windshield Mounting

1.Remove the mounting bracket cover on top of the unit by pressing on the raised dots and pushing outward. Store the cover in a safe place.

.	Clean the selected windshield area, position the suction-cup
	mount on the windshield, and press firmly on each suction
	cup to secure it in place.

3.Use a screwdriver or a small coin to adjust the suction-cup mount until the base plate is level.

. Slide detector onto base plate until it snaps into place.

Note—some vehicles have a plastic coating on the inside of the windshield designed to protect occupants in case of an accident. Use of the windshield bracket on this type of windshield can permanently mark the surface. Check with your dealer if you are unsure whether your vehicle is equipped with this type of

 windshield.