Beltronics Beltronics Express, 916, 926 manual Digit #1 solid-swsis  Digit #1 flashing-swsis 

Digit #1 solid—sws™is 

Digit #1 flashing—sws™is 

- Guard® Alert— #

When on, unit will detect signals from Interceptor vg-2 transmitters. Factory setting is off. Use of vg-2 Guard® is recommended only in areas known to use the Interceptor vg-2.Digit #2 solid—vg-2 Guard® is 

Digit #2 flashing—vg-2 Guard® is 

Safety Warning System® with Digital Voice Messages—#

(EXPRESS 926 ONLY)

When on, unit will provide Digital Voice announcement when sws™ transmitters are detected. Factory setting is on. When off, Digital Voice is replaced by sws™ “tone/clicking” only. Digit #3 solid—sws™Digital Voice is 

Digit #3 flashing—sws™Digital Voice is  (sws™ tone only)

Digital Voice Prompts for Radar/Laser/sws™ vg-2 Guard®

(DIGIT #3 FOR EXPRESS 916 ONLY)

When , unit will provide Digital Voice prompts followed by “beeps” when X/K/Ka, Laser,VG-2 Guard® and the five sws™ categories are detected. Factory setting is ON. When OFF, Digital voice prompts are replaced by separate “beeps only.

Digit #3 solid—Digital Voice Prompts .

Digit #3 flashing—Digital Voice is  (“beeps” only)

Note: Digital Voice messages for the Five sws™ catagories are not exact to what is written on the sws™ message information.

Digital Voice Prompts for Radar/Laser/vg-2 Guard® Alert—#

(EXPRESS 926 ONLY)

When on, unit will provide Digital Voice prompts followed by “beeps” when X/K/Ka, Laser and vg-2 Guard® signals are detected. Additionally, EXPRESS 916 will provide Digital Voice for sws™ categories only. Factory setting is on. When “off”, Digital Voice prompts are replaced by “beeps” only.

Digit #4 solid—Digital Voice prompts 

Digit #4 flashing—Digital Voice prompts  (“beeps” only)

