BenQ AWL-500 user manual Back panel of the Access Point, Power Socket, 10/100Mbps Ethernet Ports

Back panel of the Access Point:

Back Panel	Description
Reset button	Designed to reset the AWL500 after a system failure or crash.
	When pressed, the AWL500 will reset.
PWR/DC jack	Where power is input to AWL500 through the power adapter
	supplied with it. Please do not plug other power adapters into
	this jack.
LAN port	Where the AWL500 can be connected to ADSL/cable
	modem/Ethernet LAN via an RJ-45 cable.
Antenna	Where the radio signal carrying network data is transmitted and
	received.

NOTE

Power Socket

The power adapter plugs into the socket labeled “POWER”.

10/100Mbps Ethernet Ports

The Wireless LAN Access Point supports auto-detect, 10/100M MDI

Ethernet port.To connect the Access Point to a hub, use a straight-through

UTP cable; to connect the Access Point to a computer/station, use a

crossover UTP cable.

-4- BENQ Corporation