BenQ DC S30 user manual Capture Mode Setup, Navigating in the Capture Setting Menus

English

3.1.9 Capture Mode Setup

This menu is for setting the basic setting to be used for photography in Manual and

Auto capture modes. The Manual and Auto mode icons denote whether the setting is available for that mode or not.

3.1.9.1Navigating in the Capture Setting Menus

1.Set the mode dial to one of the available modes.

2.Press the MENU/C button. The menu screen is displayed.

3.Press the zoom in and zoom out

buttons to go up and down in the menus.

4.Press the macro and flash buttons to select and set the mode

setting.

Capture Mode Setup Mode Setting Options

Shootmode

1

XL

X Indicates currently selected mode item Current Setting

5.Press the zoom in or zoom out buttons to select another mode. Press the macro and flash buttons to select and set the mode setting as before.

6.Press MENU/C to exit the menus.

Note

When you select a setting for a mode, it is set—you don’t need to perform any other action.

3.1.9.2Capture Mode

Sets the capture mode at which the image is to be recorded.

1Single: 1 shot mode (default)

Continuous: In this mode, photographs are taken continuously at a maximum speed of 0.5 second speed interval. The maximum number of photographs that can be taken continuously is 3 photographs.

Self-timer:enables you to set the timer to take a shot. When this mode is enabled, the picture will be taken 10 seconds after the shutter button is pressed.

Notes

Shootmode

1

XL

•Use self-timer mode when you want to be included in the shot.

•Use a tripod for best results.

14Using the DC S30