Setting up Your TV

Connecting the Power Cord

1.Connect the female end of the AC power cord to the AC input on the TV.

2.As shown in the diagram, connect the male end to a wall power outlet.

Household power outlet

Power cord

•This product must be operated only from the type of power source indicated on the marking label (AC 100~240V 50/60 Hz).

•If the TV will not be used for a long period of time, it should be unplugged from the wall outlet.

Connecting the Antenna

Connecting CATV

Your BenQ TV has an internal 75 ohm coaxial cable connector, so antennal hook-up is very easy.When connecting a 75-ohm coaxial cable to your BenQ TV, secure it firmly to the ANTENNA connector. Some cable TV companies provide "pay per view" programming. Since the signal for these paid channels is encoded, most cable TV companies provide their own tuners/ decoders. You must install a tuner/ decoder to be able to view locked encoded programming. If you require special instructions on how to install cable service, please contact your cable TV provider. The tuner/decoder provided by your cable TV company can be used according to the following instructions.

Please note: you must have an RF switch with two inputs (A and B) (not supplied).

The "A" input on the RF switch (not supplied) allows you to use the TV's channel selector button to view unlocked channels. The "B" input on the RF switch (not supplied) allows you to use the channel selection button on your cable box to view locked encoded programming via the tuner/decoder.

English

Setting up Your TV

5