Remote Control
English1. POWER
Press this button to power on the TV. Press it again to put the TV into standby mode.
2. INFO
Press this button to display the TV channel message and any other signal messages. Press the EXIT button (17) to turn the info off.
3. ASPECT
Press this button to adjust screen image aspect ratio.
4. TV/CATV
Press this button to switch between TV or cable tuner mode.
5. BACKLIGHT
Press this button to select the desired backlight level.
6. PIP/PBP
(Function not available. NOT SUPPORTED will appear on the screen if this button is pressed)
7. FREEZE
(Function not available. NOT SUPPORTED will appear on the screen if this button is pressed)
8. SLEEP
Press this button to set the automatic
9. PICTURE
Press this button to select from among 4 user situation modes.
10. PIP AUDIO
(Function not available. NOT SUPPORTED will appear on the screen if this button is pressed)
11. CH +/- (add/erase)
Press this button to add the current TV channel to the sequential channel selection set. Press this button again to erase the current TV channel from the sequential channel set.
12. "i" key
(Function not available. NOT SUPPORTED will appear on the screen if this button is pressed)
13. MENU
Press this button to display the OSD
or buttons to select items. Pressing this button again removes the OSD display.
14. INPUT
Press this button to select your desired input source.
10Remote Control