BenQ FP591 user manual Refresh Rate Selection

BenQ LCD Color Monitor User's Guide

C. Refresh Rate Selection

There is no need to choose the highest possible refresh rate on an LC display. It is not technically possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely flicker- free image. More important is that you make sure that you use one of the factory modes. In con- trast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-frequency monitor. This means, the best results are only obtained by using the factory modes. You will find a table with the factory modes in this user's guide. These modes, for example, are 60, 70 and 75 Hertz, but not 72Hz, for the native resolution of 1024x768. In Windows 95/ 98/2 000/ XP you can change the refresh rate as follows:

1.Double click the "Display" icon in the Control Panel.

2.From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner.

English 34