Controls and functions
Projector
1
2 
3 | 9 | |
4 | 10 | |
11 | ||
5 | ||
| ||
6 | 7 | |
7 | 12 | |
| ||
8 | 13 | |
9 |
|
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See "Fine- tuning the image size and clarity" on page 26 for details.
3.TEMP(temperature) warning light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 66 for details.
4.MENU/EXIT
Turns on the
5.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 66 for detail.
6.II POWER
Toggles the projector between standby mode and on.See "Starting up the projector" on page 24 and "Shutting down the projector" on page 45 for details.
7.Volume /Arrow keys ( 
/ 
Left,
/ 
Right)
Adjusts the sound level.
When the
8.ECO BLANK
Used to hide the screen picture. See "Hiding the image" on page 41 for details.
9.Keystone/Arrow keys ( 
/ 
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 27 for details.
10.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 66 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See
12.SOURCE
Displays the source selection bar. See "Switching input signal" on page 32 for details.
13.MODE/ENTER
Selects an available picture setup mode. See "Selecting a picture mode" on page 35 for details.
Activates the selected
10 Introduction
