| Function | |
5. SYSTEM | Standby | |
SETUP: Advanced | Settings | |
Network | ||
menu | ||
Settings | ||
Reset All | ||
| ||
| Settings |
6. |
|
INFORMATIONmenu | Current |
| |
| System |
| Status |
Description
Network
Selecting On enables the function. The projector is able to provide the network function when it is in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER jack is correctly connected to devices. See "Connection" on page 16 for how to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press 
/ 
to choose the source that you wish to use. See "Connection" on page 16 for how to make the connection.
Enabling this function slightly increases the standby power consumption.
See BenQ Network Projector Operation Guide for details.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, User 1, User 2, Color Space Conversion, Language, Projector Installation, High Altitude Mode, Security Settings, Baud Rate and Network Settings.
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows the input system format.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows the firmware version of your projector.
Operation 47
