Safety Instructions (Continued)
7. | Do not place this projector in any of the 8. | Do not block the ventilation holes. |
| following environments. | - Do not place this unit on a blanket, |
| - Space that is poorly ventilated or confined. | bedding or any other soft surface. |
| - Do not cover this unit with a cloth or any | |
| Allow at least 50 cm clearance from walls | |
| and free flow of air around the projector. | other item. |
| - Locations where temperatures may | - Do not place inflammables near the |
| become excessively high, such as the | projector. |
| inside of a car with all windows rolled up. |
|
| - Locations where excessive humidity, dust, |
|
| or cigarette smoke may contaminate |
|
| optical components, shortening the |
|
| projector’s life span and darkening the |
|
| image. |
|
| If the ventilation holes are seriously | |
| obstructed, overheating inside the unit | |
| may result in a fire. | |
9. | Always place the unit on a level, hori- | |
| zontal surface during operation. | |
| - Do not use if tilted at an angle of more | |
- Locations near fire alarms | than 10 degrees left to right, nor at angle | |
of more than 15 degrees front to back. | ||
- Locations with an ambient temperature | ||
Using the unit when it is not fully | ||
above 40°C / 104°F | horizontal may cause a malfunction of, or | |
- Locations where the altitudes are higher | damage to, the lamp. | |
than 10000 feet. |
|
10000
ft.
10.Do not stand the unit on end vertically.
Doing so may cause the unit to fall over, causing injury or resulting in damage to the unit.
Important Safety Instructions | 3 |
