Step 7. Reset the lamp counter
i. Press and hold Exit on the projector for 3 seconds to display the total used lamp time.
ii.Press Menu on the projector or on the remote control to access the lamp hour timer. An adjustment message will appear.
iii.Press W or X to reset lamp hours and press EXIT to leave.
Temp Warning Light
When the Temperature warning light is on, it is warning you of the following possible prob- lems:
1.The internal temperature is too high.
2.Air Filters are clogged.
3.The fans are not working.
Turn the projector off , check that the air filters are clean. If the problem persists, contact qualified service personnel for further help.
For more detailed information, please refer to the following section.
Indicators
Illustration - table legend.
1.Blank
2.
: Light flashing
3.
: Light ON
4.O : Orange light
5.R : Red light
6.G : Green light
40 Maintenance
