Remote paging operations, English, Using the remote control

To cancel the timer, perform the following steps.

5.Press to highlight Timer Counting Direction and select your desired counting direction by pressing /

Selection	Description
Count Up	Increases from 0 to the preset time.
Count down	Decreases from the preset time to 0.

English

6.Press to highlight Timer Audible Reminder and decide if you want to activate the sound reminder by pressing / . If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be generated when the timer is up.

7.To activate the presentation timer, press and press / to highlight On and press ENTER.

8.A confirmation message displays. Highlight Yes and press ENTER on the projector or remote control to confirm. You will see the message “Timer is On” displaying on the screen. The timer start counting at the time the timer is on.

NOTICE

Are you sure to turn on the

presentation timer?

Yes No

To cancel the timer, perform the following steps.

•Using the remote control

Press TIMER ON/SHOW and press / to highlight Off and press ENTER.

•Using the OSD menu

1.Press MENU/EXIT and then press / until the SYSTEM SETUP: Basic menu is highlighted.

2.Press to highlight Presentation Timer and press ENTER to display the Presentation Timer page.

3.Press and press / to highlight Off and press ENTER. A confirmation message displays.

4.Highlight Yes and press ENTER to confirm. You will see the message “Timer is Off ” displaying on the screen.

How to use the TIMER ON/SHOW key?

It is a multi-functional key.

•If the presentation timer is off, pressing this key displays a

confirmation message. You can decide whether to activate the timer or not by following the on-screen instruction.

• If the timer is already on, pressing this key displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the on-screen instruction.