Medium weight woven cotton bias strip 2 X

CREATING AND ATTACHING COVERED CORDED PIPING

FABRIC:	Medium weight woven cotton bias strip 2” X 8”
	Medium weight woven cotton 3” X 8”
	12” of 3/8” cotton cording
NEEDLES:	80/12 Universal
THREAD:	4 cones of serger thread
PRESSER FOOT:	Multi-Purpose Foot with Guide

Instruction Manual pg.___

Instruction Manual for Multi-Purpose Attachment with Guide

•Following the directions in the Instruction Manual on page___, thread for a balanced 4-thread Overlock stitch using the Left and Center Needle.

•Turn the Stitch Selection Dial to “A”.

•Set Stitch Length to 3.

•Attach the Multi-Purpose Foot and Guide following the directions in the Instruction Manual for Multi-purpose Attachment with Guide.

•Place the 3” X 8” fabric under the Presser Foot.

•Insert the cord into the Guide.

•Wrap the bias strip around the cord and place the covered cord in the groove under the Presser Foot and on top of the other fabric.

•Serge making the covered cord and attaching it to the fabric strip in one stitching.

•Press the seam allowance to the wrong side of the fabric strip.

•Trim and mount the sample.

Section D - page 11

Bernina 2500 manual Medium weight woven cotton bias strip 2 X