Section E Covers and Chains

SECTION E – COVERS AND CHAINS

CONVERSION TO COVER /CHAIN STITCH

Conversion Chart - Instruction Manual pg.___ and Quick Reference Card The Converter Arm – Instruction Manual pg.___

•Disengages the Upper Looper shaft

•Use the Needle Stop Button to lower the Needles

•Removing the Knife Guard – Instruction Manual pg.___

Attaching the Cover/Chain Stitch Extension Plate – Instruction Manual pg.___

Swing Out Presser Foot – Instruction Manual pg.___

•Easier Needle threading

•Locks the machine for safety

Raising the Knife Arm – Instruction Manual pg.___

•Rotate the knife up

•Remember to snug the White Locking Screw after moving the arm Which Needles To Use – Instruction Manual pg. __

•4-Thread Cover Stitch – Left, Center, and Right Needles

•5-Thread Top and Bottom Cover Stitch – Left, Center, and Right Needles

•Wide 3-Thread Cover Stitch – Left and Right Needles

•Wide 4-Thread Top and Bottom Cover Stitch – Left and Right Needles

•Narrow 3-Thread (2.5mm) Cover Stitch – Center and Right Needles or Left and Center Needles

•Narrow 4-Thread Top and Bottom Cover Stitch – Left and Center Needles

•Chain stitch – Right Needle only

THE COVER/CHAIN STITCH FOOT – Instruction Manual pg.___

•Wider for better fabric feeding

•Floating Toes to level the Presser Foot Easier fabric guiding

•This Presser Foot does not swing to the left

•Closed holes

Completes the threading path

THREADING FOR COVER/CHAIN STITCH – Instruction Manual pg.___

First - Cover/Chain Stitch Looper

Second - Right Needle

Third - Center Needle

Fourth - Left Needle

•Raise the Presser Foot to open the Tension Disks.

Section E - page 1