With the zebra selected, click on the Wreath tool and select “6” from the drop down menu.
Move the mouse without clicking until the zebras are positioned in a circle with the front feet of one zebra close to, but not overlapping, the next zebra. Click the mouse when satisfied with the placement.
Save the design as Circle of Zebras.ART.
Click on the Write to Machine icon and send the design to a USB stick or your embroidery system.
Circle of Animals
(14” x 20” moss yellow fabric; bind with bias color 2)
Open design BC01418 — the small plant.
Right click on the Show Hoop icon. Select the Jumbo Hoop #26 and place
a check in the box next to Display Hoops. Click OK.
Note: If you do not have an 830 with the Jumbo Hoop, continue to work in the Large Oval Hoop. The design will be too large to stitch in one hoop- ing, so you will need to reposition the designs to fit, or use the
Click the Show All icon.
Select File > Insert Design and select design BC01408 — the small hippo. Move it above the plant.
Select File > Insert Design and select design BC01402 — the small monkey. Move it below the plant.
Select File > Insert Design and select design BC01404 — the small elephant. Move it to the right of the plant. Click the elephant design again and the sizing handles will become hollow. Click and drag the upper right hollow handle and rotate the design clockwise approximately
©2011 BERNINA of America, Inc.
With the elephant still selected, move it down in the hoop until its rear feet are aligned with the plant.
Select File > Insert Design and select design BC01406 — the small zebra. Move it to the left of the plant. Click the zebra design again drag the upper right hollow handle to rotate the design clockwise approximately 59°.
With the zebra still selected, move it down until its front hooves are aligned with the plant.
Save the design as Circle of Animals.ART.
Click on the Write to Machine icon and send the design to a USB stick or your embroidery sys- tem.
Coconut Tree and Monkey
(10” x 14” green fabric; bind with bias color 2)
Open design BC01417 — the coconut tree.
Select File > Insert Design and select design BC01423 — the snail. Move it to
the lower right of the mushroom.
Right click on the Show Hoops icon. Select the artista 255 x 145 hoop and place a check in the box next to Display Hoops. Click OK.
Select File > Insert Design and select design BC01415 — the monkey. Move it to the right of the coconut tree.
Save the design as Coconut Tree and Mon- key.ART.
Click on the Write to Machine icon and send the design to a USB stick or your embroidery system.
jpl | Page 9 of 10 |
