3.Flexible Connections:

a)If the unit is to be installed with flexible couplings and/or quick disconnect fittings, the installer must use a heavy-duty, AGA design-certified commerciai flexible connector of at least 1/2" (1.3 cm) ID NPT (with suitable strain reliefs) in compliance with ANSI Z21.41 and Z21.69 standards.

b)In Massachusetts: The unit must be installed with a 36" (3-foot) long flexible gas connector.

c)In Canada: CAN 1-6.10-88 metal connectors for gas appliances and CAN 1-6.9 M79 quick disconnect device for use with gas fuel.

CAUTlON: Leak testing of the appliance shall be conducted according to the manufacturer's instructions. Before placing the oven into operation, always check for leaks with a soapy water solution or other acceptable method. DO NOT USE AN OPEN FLAME TO CHECK FOR LEAKS!

A 2”( 5 cm)

B 3”(7,6 cm)

D 8”(20,3 cm)

A properly-grounded horizontally- mounted electrical receptacle should be installed no higher than 3" (7.6 cm) above the floor, no less than 2”( 5 cm) and no more than 8”(20,3 cm) from the right side (facing product). Check all local code requirements.

An agency-approved, properly-sized manual shut-off valve should be installed no higher than 3" (7.6 cm) above the floor and no less than 2”( 5 cm) and no more than 8”(20,3 cm) from the left side (facing product). To connect gas between shut-off valve and regulator, use agency-approved, properly sized flexible or rigid pipe. Check all local code requirements.

PERFORMANCE CHECKLlST

All burners are tested before leaving the factory. There are no adjustments for the burners if connected according to the information on the rating plate. Check each burner for proper operations. Flames should be blue in all settings. If service is required, contact your dealer for the name of their authorized service agency. Gas conversions and initial installation are not the responsibility of the manufacturer.

The installer should carry out the following performance checks. Refer to instructions below.

1.Check surface burner ignition.

2.Check air shutter adjustment (only for oven and broiler burner)- sharp blue flame, no yellow tipping, sooting or flame lifting

3.Check low flame adjustment

4.Check broiler and oven ignition - all burner ports.

5.Check for gas leaks (odors) at all gas connections.

6.Check oven bake and convection bake function.

FINAL PREPARATION

1.Some stainless steel parts may have a plastic protective wrap which must be removed. The interior of the oven should be washed thoroughly with hot soapy water to remove film residues and any installation dust or debris before using it for food preparation, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

2.All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner recommended for use with stainless steel If buildup occurs, do not use steel wool, abrasive cloths, cleaners, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the

material, then use a wood or nylon scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel! Scratches are almost impossible to remove.

NOTE: These installation instructions should remain with the unit for future reference. The electrical diagram is located in the backside or the appliance.

8

Page 8
Image 8
Bertazzoni M7S0GTU4X(2 OR 5)A, X304GGVX dimensions Performance CHECKLlST

X304GGVX, M7S0GTU4X(2 OR 5)A specifications

Bertazzoni has long been synonymous with quality and craftsmanship in kitchen appliances, and the M7S0GTU4X(2 OR 5)A,X304GGVX is no exception. This standout model exemplifies the brand's commitment to combining traditional Italian design with modern technology, offering both functionality and aesthetic appeal for the contemporary kitchen.

At the heart of the M7S0GTU4X is its powerful multi-burner system, which features numerous gas burners, allowing for simultaneous cooking of multiple dishes. The efficient and responsive flame control gives users the ability to switch between high heat for searing and low heat for simmering with ease. Each burner is designed to provide uniform heat distribution, ensuring that every meal is cooked perfectly.

One of the defining features of the M7S0GTU4X is its spacious oven with advanced convection technology. This inventive system circulates hot air throughout the oven cavity, reducing cooking times and promoting even baking. The oven also boasts a self-cleaning function, making maintenance effortless while ensuring a hygienic cooking environment. With different cooking modes available, including baking, broiling, and roasting, home chefs can experiment with diverse culinary techniques.

In terms of build quality, the Bertazzoni M7S0GTU4X is constructed from durable materials that not only enhance its longevity but also contribute to its sleek, professional appearance. The stainless steel finish is both stylish and resistant to fingerprints, making it easy to maintain a pristine look in the kitchen. The design also incorporates ergonomic controls and a user-friendly interface, allowing for straightforward operation.

Safety is a key consideration with this model, featuring an automatic shut-off function and flame failure safety device to ensure peace of mind while cooking. The inclusion of precision engineering standards also underscores Bertazzoni's dedication to quality and performance.

Overall, the Bertazzoni M7S0GTU4X(2 OR 5)A,X304GGVX represents a perfect blend of style, technology, and practicality. It caters to the needs of both novice cooks and culinary enthusiasts alike, making it a valuable addition to any modern kitchen. With its remarkable features and thoughtful design, this model promises to elevate the cooking experience and inspire creativity at every meal. Whether preparing a weekday dinner or hosting a special gathering, the Bertazzoni M7S0GTU4X is poised to deliver exceptional results every time.