Bertazzoni MAS30 4 GAS XE, MAS30 4 GAS XT manual Broiler Burner

Models: MAS30 4 GAS XE MAS30 4 GAS XT

1 32
Download 32 pages 58.98 Kb
Page 17
Image 17
STEP 4: BROILER BURNER

Loosen and the screw V and pull out the burner from the support being careful not to damage the ignition plug and the thermocouple

Unscrew the nozzle R using a 7 mm. spanner and replace it with the nozzle for the new type of gas according to what is indicate in the table below ATTENTION: pay extra attention to avoid damage to the igniter and thermocouple.

Re‐install all the parts in revers sequence

STEP 4: BROILER BURNER

Loosen the screw and pull out the burner from the support being careful not to damage the ignition plug and the thermocouple.

Using a 7 mm [name of the tool] unscrew the nozzle. Replace the nozzle using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 20 for matching nozzles to burners.

Adjust the gap X by setting it to fully open position.

17

Page 17
Image 17
Bertazzoni MAS30 4 GAS XE, MAS30 4 GAS XT manual Broiler Burner