MCS 20 – MCS 223 Microphone Unit 43
english
How to load the configuration
• The procedure for loading a setup is almost the same as when saving a setup. Please note in step 4 you have to
press the “Prior” button instead of the microphone button .
•Step 1 –How to activate the programming mode
Press the “Voice” button and the “Requ” button simultaneously for a few seconds (press the “Voice”
button first), until a function number is displayed (refer to the table of programmable functions), which is
indicated by a flashing full stop after the left number.
•Step 2 –How to select function 00 (setup menu)
Press the [-] “Limit” button , until the function number 00 is displayed.
•Step 3 –How to select the setup number
Press one of the “Vol” buttons , until the requested setup number (1 - 7) is displayed . The full stop after the
right number is flashing.
•Step 4 –How to load the setup
Press the “Prior” button to load the saved setup. Please make sure that the full stop after the right number in
the display is flashing. When the loading has been successful, the display is briefly turned off to confirm.
•Step 5 –How to leave the programming mode
If there is no entry after one minute, the programming mode is automatically left. Furthermore, you can leave the
programming mode as described below:
Press the “Clear” button .
OR
Press the “Voice” button and the “Requ” button simultaneously (press the “Voice” button first).
0.6
full stop after the left
number is flashing
function 06