File Playback Function
content type; movie, music and photo. This will be explained in greater detail in the following section.
3) Step 3: Exploring Folders and Files
Once you select a content type, i.e., “Movie” and storage or device, i.e., “Network”, press the OK button to enter the list of folders and/or files (the file list). In the file list, the UP/DOWN buttons move the cursor upward or downward to select a folder or file. Please remember that the UP/DOWN buttons do not change your selection of the storage type, i.e., “HDD” on the left menu in this operation mode. If you want to change the storage type, you have to exit from the file list with the EXIT button.
You can play content with the OK or PLAY button. More information of playback by content types will be supplied later.
NOTE
z There are two operation modes for exploring contents; in the first operation mode, you can select an icon (content type) on the top menu with the LEFT/RIGHT buttons and an icon (device) on the left menu with the UP/DOWN buttons. The second operation mode you can enter with the OK button is selecting a folder or file.
zYou can change the content type while you are exploring folders and files in a list of files with the LEFT/RIGHT buttons without exiting
from it. However you can not change a device on the left menu with the UP/DOWN buttons unless you exit.
zThe USB device must be compatible with the USB 2.0 standard.
zIf there is no device listed on the screen after scanning, please check the network connection and make sure its set and configured properly.
zYou can scan a specific network device with its IP address. Please press the GREEN button and enter the IP address of the device.
WARNING
zEach USB port can supply maximum of 500mA to the external device. Connecting devices consuming more than 500mA can damage the
53
