Billion Electric Company 7402VL user manual Option, Description, Flash-hook, 74xnumber#

VoIP/(802.11g) ADSL2+ Router

Special dial codes

The following table lists the special dial codes that are built-in to the system:

Option	Description
Flash-hook	Switch to PSTN line
	Note: A quick press of the hook. On some phones a button is provided
(7402VGP only)
	which provides Flash-hook functionality. The button is marked "FLASH"
	or "RECALL".
	Return the last missed call for SIP service only
*69	Note: Entering this on a phone will call the last number which made a
	call to the phone. For example A makes a call to B, but hangs up before
	B answers. If B enters *69, A will be called.
##	Last number redial
	Set do not disturb on
*20	Note: It is possible to set a Do-Not-Disturb feature on a phone such that
	any phone which calls the phone will receive an engaged tone and the
	phone called will not ring. For example, B enters *20 and hangs up. A
	makes a call to B, and receives the engaged tone and phone B does not
	ring.
*80	Set do not disturb off
	Set the number for Speeddial code ‘x’, where ‘x’ is a number
	between 2 and 9.
*74<x><number>#	Note: Where <x> is a number between 2 and 9, and <number> is the
	number to dial. The code needed to dial a speeddial from a phone
	connected to a VoIP Router is:
	<x>#, where <x> is a number between 2 and 9.
	The settings will infect to your setting in Speed Dial on WEB GUI.
	Set the number for performing Blind Call Transfer, where
	<phone-number> is the number that you wish to transfer the
	call to. It’s for SIP service only.
	Note: In Blind Call Transfer, you have a call in progress (incoming or
	outgoing) and decide you wish to transfer the call to another phone. To
	transfer the call, perform the following steps:
*90<phone-number>	1. Hook-flash to get a dial tone.
	2. Dial *90<phone-number> (e.g. *907401), there will be a confirmation
	tone then hang up. The other end will hear ring back and the called third-
	party phone will ring. When the third-party phone is picked up the two
	calls will be connected.
	If the third-party phone does not answer then the caller being transferred
	can hang up to cancel the connect attempt.

79

Chapter 4: Configuration