Ethernet Client Filter

VoIP/(802.11g) ADSL2+ Router

Ethernet Client Filter

The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage your network control to accept traffic from specific authorized machines or can restrict unwanted machine(s) to access your LAN.

There are no pre-define Ethernet MAC address filter rules; you can add the filter rules to meet your requirements.

Ethernet Client Filter: Default setting is set to Disable.

Allowed: check to authorize specific device accessing your LAN by insert the MAC

Address in the space provided or click Ethernet Client Filter: Default setting is set to Disable.. Make sure your PC’s MAC is listed.

Blocked: check to prevent unwanted device accessing your LAN by insert the MAC

Address in the space provided or click Manual background. Make sure your PC’s MAC is not listed.

The maximum client is 16. The MAC addresses are 6 bytes long; they are presented only in hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.

(Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included)

Candidates: automatically detects devices connected to the router through the Ethernet. .

Manual background → Active PC in LAN

29

Chapter 4: Configuration

Page 30
Image 30
Billion Electric Company 7402VL user manual Ethernet Client Filter Default setting is set to Disable