unsecured communication channel (i.e. over the Internet). There are three modes, MODP 768-bit, MODP 1024-bit and MODP 1536-bit. MODP stands for Modular Exponentiation Groups.

SA Lifetime: Specify the number of minutes that a Security Association (SA) will stay active before new encryption and authentication key will be exchanged. There are two kinds of SAs, IKE and IPSec. IKE negotiates and establishes SA on behalf of IPSec, an IKE SA is used by IKE.

Phase 1 (IKE): To issue an initial connection request for a new VPN tunnel. The range can be from 5 to 15,000 minutes, and the default is 480 minutes.

Phase 2 (IPSec): To negotiate and establish secure authentication. The range can be from 5 to 15,000 minutes, and the default is 60 minutes.

A short SA time increases security by forcing the two parties to update the keys. However, every time the VPN tunnel re-negotiates, access through the tunnel will be temporarily disconnected.

PING for Keep Alive:

None: The default setting is None. To this mode, it will not detect the remote IPSec peer has been lost or not. It only follows the policy of Disconnection time after no traffic, which the re- mote IPSec will be disconnected afther the time you set in this function.

PING: This mode will detect the remote IPSec peer has lost or not by pinging specify IP ad- dress.

DPD: Dead peer detection (DPD) is a keeping alive mechanism that enables the router to be detected lively when the connection between the router and a remote IPSec peer has lost. Please be noted, it must be enabled on the both sites.

PING to the IP: It is able to IP Ping the remote PC with the specified IP address and alert when the connection fails. Once alter message is received, Router will drop this tunnel connection. Reestablish of this connection is required. Default setting is 0.0.0.0 which disables the function.

Interval: This sets the time interval between Pings to the IP function to monitor the connection status. Default interval setting is 10 seconds. Time interval can be set from 0 to 3600 second, 0 second disables the function.

Ping to the IP

Interval (sec)

Ping to the IP Action

0.0.0.0

0

No

0.0.0.0

2000

No

xxx.xxx.xxx.xxx (A valid IP Address)

0

No

xxx.xxx.xxx.xxx(A valid IP Address)

2000

Yes, activate it in every 2000

 

 

second.

Disconnection Time after no traffic: It is the NO Response time clock. When no traffic stage time is beyond the Disconnection time set, Router will automatically halt the tunnel connection and re-establish it base on the Reconnection Time set. 180 seconds is minimum time interval for this function.

Reconnection Time: It is the reconnecting time interval after NO TRAFFIC is initiated. 3 minutes is minimum time interval for this function.

Click Edit/Delete to save your changes.

98

Page 103
Image 103
Billion Electric Company 7404V(G)PX, 7404V(G)OX Ping for Keep Alive, Ping to the IP Interval sec Ping to the IP Action

7404V(G)PX, 7404V(G)OX specifications

Billion Electric Company has emerged as a prominent player in the realm of broadband communications and networking solutions. Among its extensive range of products, the Billion 7404V(G)OX and 7404V(G)PX stand out as robust solutions designed to cater to the demands of home and small office users.

The Billion 7404V(G)OX model is primarily positioned as an ADSL2+ VoIP router, featuring a built-in DSL modem that supports a wide range of ADSL standards, including ADSL and ADSL2+. With its advanced functionalities, this device offers high-speed internet access while simultaneously providing voice over IP capabilities. The inclusion of four Ethernet ports allows users to connect multiple wired devices, and its wireless capabilities support the 802.11n standard, providing coverage and speed enhancements for Wi-Fi connectivity.

On the other hand, the 7404V(G)PX shares similar core attributes while incorporating additional features suited for enhanced performance. This model is also an ADSL2+ VoIP router with a built-in DSL modem but differentiates itself with integrated telephony support. It facilitates a seamless integration of voice and data, making it suitable for users seeking a unified communication solution. The device provides QoS (Quality of Service) features which prioritize voice traffic, ensuring clear and uninterrupted calling experiences.

Both models feature easy setup processes enabled by their user-friendly web interface, which facilitates convenient management of network settings. Security is another strong point, providing WPA/WPA2 encryption and SPI firewall capabilities to safeguard the network against unauthorized access and threats.

Notably, the Billion 7404V(G)OX and 7404V(G)PX support TR-069, a remote management protocol, allowing Internet Service Providers to efficiently manage and configure customer premises equipment, streamlining the provision of services.

In addition to their versatile features, these routers have a compact design that suits various home and office setups. Their reliability and performance make them excellent choices for users needing stable internet connectivity and integrated VoIP capabilities. Whether for casual surfing or business communications, the Billion 7404V(G)OX and 7404V(G)PX are compelling solutions in the competitive landscape of networking technologies.