Billion Electric Company BIPAC 7500 quick start Configuring PC in Windows NT4.0, Quick Start Guide

Models: BIPAC 7500

1 12

Page 10

Quick Start Guide

1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab.

2.Select TCP/IP Protocol and click Properties.

3.Select the Obtain an IP address from a DHCP server radio button and click OK.

Image 10

Contents

802.11g ADSL VPN Firewall Router with 3DES Accelerator BIPAC-7500GQuick Start Guide Page Package Contents Quick Start Guide The Front LEDsMeaning 1 PWR 2 SYS 3 LAN port 4 LAN port 5 LAN port 6 LAN port 7 WLANPort RESET PWR Power SwitchThe Rear Ports LINE CONSOLE LAN 1XConnecting Your ADSL Router Quick Start Guide4. Select Internet Protocol TCP/IP and click Properties Configuring PC in Windows XPNetwork Connections 2. Double-click Local Area Connection 6. Click OK to finish the configurationQuick Start Guide Configuring PC in Windows2. Double-click Local Area Connection 4. Select Internet Protocol TCP/IP and click Properties2. Select TCP/IP Configuring PC in Windows 98/Me3. Select the Obtain an IP address automatically radio button Configuring PC in Windows NT4.0 Quick Start GuideNetscape 4.5 or above installed Configuring Your ADSL VPN Firewall RouterTo configure this device, you must have IE Verifying Your Local Network Connection with the DeviceContact Billion AUSTRALIA Connecting to the RouterProduct Support and Contact Information WORLDWIDE