Vector SMATE200A manual Single-pathinstrument, Step c Configure RF path, Mandatory, Optional

Single-path instrument

Applies if the instrument is equipped with one RF path and no more than one baseband path.

Step c Configure RF path					MANDATORY
Choose frequency range (only one choice possible)					MANDATORY
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATEB103	100 kHz to 3 GHz	SMATE200A	SMATEB106	HW	Factory-installed
SMATEB106	100 kHz to 6 GHz	SMATE200A	SMATEB103	HW	Factory-installed
Choose output configuration					OPTIONAL
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATE-B22	Low Phase Noise and analog	SMATEB10x	-	HW	Factory-installed
	modulation FM and PhiM
SMATE-B31	High-Power Output	SMATEB10x	-	HW	Factory-installed

Step d Configure baseband path					OPTIONAL
Choose baseband source					MANDATORY
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATE-B13	Baseband Main Module	SMATEB10x	-	HW	Factory-installed.
SMATE-B10	Baseband Generator with				Requires SMATEB10, SMATE-B11 or SMATEK62.
		SMATE-B13	SMATEB11	HW	Factory-installed
	ARB (64 MSamples) and
	Digital Modulation
SMATE-B11	Baseband Generator with	SMATE-B13	SMATEB10	HW	Factory-installed
	ARB (16 MSamples) and
	Digital Modulation
Choose baseband hardware					OPTIONAL
SMATE-B16	Differential I/Q Output	SMATE-B10 or B11	-	HW	Factory-installed
Choose digital modulation systems					OPTIONAL
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATE-K40	Dig. Std. GSM/EDGE	SMATE-B10 or B11	-	SW
SMATE-K42 Dig. Std. 3GPP FDD		SMATE-B10 or B11	-	SW
SMATE-K43 3GPP enhanced MS/BS tests		SMATE-K42	-	SW
	incl. HSDPA
SMATE-K46	Dig. Std. CDMA2000	SMATE-B10 or B11	-	SW
SMATE-K61	Multicarrier CW Signal	SMATE-B10 or B11	-	SW
	Generation

Vector Signal Generator R&S SMATE200A 4