Vector SMATE200A manual Two-pathinstrument, Step c Configure RF path A, Step d Configure RF path B

Two-path instrument

Applies if the instrument is equipped with up to two RF paths and up to two baseband paths.

Step c Configure RF path A					MANDATORY
Choose frequency range (only one choice possible)					MANDATORY
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATEB103	100 kHz to 3 GHz	SMATE200A	SMATEB106	HW	Factory-installed
SMATEB106	100 kHz to 6 GHz	SMATE200A	SMATEB103	HW	Factory-installed
Choose output configuration					OPTIONAL
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATE-B22	Low Phase Noise and analog	SMATEB10x	-	HW	Factory-installed
	modulation FM and PhiM
SMATE-B31	High-Power Output	SMATEB10x	-	HW	Factory-installed

Step d Configure RF path B					OPTIONAL
Choose frequency range (only one choice possible)					MANDATORY
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATEB203	100 kHz to 3 GHz	SMATEB10x	SMATEB206	HW	Factory-installed
SMATEB206	100 kHz to 6 GHz	SMATEB10x	SMATEB203	HW	Factory-installed
Choose output configuration					OPTIONAL
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATE-B22	Low Phase Noise and analog	SMATEB10x	-	HW	Factory-installed
	modulation FM and PhiM				Second option for path B. If only once installed it will
					added to path A automatically.
SMATE-B36	High-Power Output	SMATEB20x	-	HW	Factory-installed

Vector Signal Generator R&S SMATE200A 6