Vector SMATE200A manual Optional, Choose noise

Choose digital modulation systems with R&S WinIQSIM™ 1					OPTIONAL
Option	Description	Requires	Not compatible with	HW or SW	Remarks
SMATE-K11	Dig. Std. IS-95	SMATE-B10 or B11	-	SW	With WinIQSIM™
SMATE-K12	Dig. Std. CDMA2000	SMATE-B10 or B11	-	SW	With WinIQSIM™
SMATE-K13 Dig. Std. 3GPP TDD		SMATE-B10 or B11	-	SW	With WinIQSIM™
SMATE-K14	Dig. Std. TD-SCDMA	SMATE-B10 or B11	-	SW	With WinIQSIM™
SMATE-K15	User-Defined OFDM Signals	SMATE-B10 or B11	-	SW	With WinIQSIM™ and WinIQOFDM
SMATE-K17	Dig. Std. 1xEV-DO	SMATE-B10 or B11	-	SW	With WinIQSIM™
SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g)		SMATE-B10 or B11	-	SW	With WinIQSIM™
SMATE-K20 Dig. Std. 3GPP incl. HSDPA		SMATE-B10 or B11	-	SW	With WinIQSIM™

Choose noise				OPTIONAL
Option	Description	Requires	Not compatible with	HW or SW Remarks
SMATE-K62	Additive White Gaussian	SMATE-B13	-	SW
	Noise (AWGN)

Note: Digital modulation systems and noise can be used either in baseband path A or baseband path B. The digital modulation systems or noise will be required twice only if the baseband paths are used simultaneously. (For example, an instrument is equipped with one R&S SMATE-K40 and two R&S SMATE-B10. In this con- figuration, R&S SMATE-K40 can be used either on baseband path A or baseband path B. For simultaneous use on both baseband paths, R&S SMATE-K40 would be required twice.)

As only one set of Differential I/Q outputs SMATE-B16 can be installed, they can be switched to path A or B like the I/Q-outputs.

1R&S WinIQSIM™ requires an external PC.

Vector Signal Generator R&S SMATE200A 9