MV650H PUSH Vacuum Owner’s Manual

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation

Every Use

Daily or Every 5

Every 25 Hours

Every 50

Every 100-150

 

 

Hours

 

Hours

Hours

 

 

 

 

 

 

Inspect for worn or damaged parts.

z

 

 

 

 

 

 

 

 

 

 

Check for excessive vibration

 

z

 

 

 

 

 

 

 

 

 

Inspect for loose parts.

 

z

 

 

 

 

 

 

 

 

 

Clean Debris Bag

z

 

 

 

 

 

 

 

 

 

 

Lubricate throttle control cable and linkage.

 

 

z

 

 

NOTE: Use white lithium grease or equivalent

 

 

 

 

 

 

 

 

 

 

 

IMPELLER REMOVAL

READ all safety instructions before servicing unit.

DISCONNECT spark plug wire before servicing unit.

Tools required:

-1/2” socket, 3/8” drive and 3/8” ratchet

-drive extension, 3/8” drive

-universal joint, 3/8” drive

-pry bar or long screwdriver

-jack stands or similar device adequate to support weight of machine.

1.Wait for engine to cool and disconnect spark plug.

2.Drain fuel and oil from the engine.

3.Remove engine, impeller and mounting plate by removing bolts around outside of housing.

4.Leaving engine fastened to plate, remove impeller bolt and lock washer and slide impeller off crankshaft

(A puller may be required).

CAUTION: Do not drop impeller.

5.If impeller does not slide off crankshaft, place two crowbars between impeller and housing on opposite sides. Pry impeller away from engine until it loosens. Using a penetrating oil can help loosen a stuck impeller.

6.If the impeller cannot be loosened, obtain a 3/8-24x3 ¾” longer bolt of the same diameter and thread type as the impeller bolt. Invert engine and impeller and support engine above ground to prevent recoil damage. Thread longer bolt by hand into the crankshaft until bolt bottoms. Using a suitable gear or wheel puller against the bolt head and the impeller back-plate (near the blades), remove impeller from shaft.

7.To reinstall impeller, use a new impeller bolt and lockwasher

8.Tighten impeller bolt. Torque impeller bolt to 50 Ft. Lbs. (68 N.m).

9.Reinstall engine, impeller, and mounting plate onto housing in reverse order of removal.

10.Before connecting spark plug wire, slowly pull engine starting rope to insure that impeller rotates freely.

11.Reconnect spark plug wire.

Part No 840186

18

Form No F030106A

Page 18
Image 18
Billy Goat MV650H owner manual Periodic Maintenance, Impeller Removal

MV650H specifications

The Billy Goat MV650H is a top-of-the-line debris and leaf vacuum designed to tackle tough clean-up tasks in both residential and commercial settings. Engineered for efficiency and convenience, this powerful machine combines robust performance with a host of innovative features that make yard work simpler and more effective.

At the heart of the MV650H is its reliable Honda GX200 engine. This 4-stroke, air-cooled engine delivers a maximum of 6.5 horsepower, ensuring that users can handle even the heaviest debris with ease. The engine is designed for quick starts and smooth operation, featuring a low oil alert to prevent damage and a reliable recoil starter that provides dependable ignition every time.

One of the standout characteristics of the MV650H is its impressive suction power. The vacuum is equipped with a large, high-efficiency impeller that generates strong vacuum flows to effectively collect leaves, grass clippings, and other debris. This capability is further enhanced by the wide, 27-inch intake, allowing users to cover a larger area in less time.

Another key feature is the machine's collection bag, which holds an impressive 50 gallons of debris. This large capacity minimizes the need for frequent stops, allowing users to maximize productivity. The durable, easy-to-empty collection bag is designed for convenience, as it can be quickly removed and emptied into compost piles or yard waste bins.

The MV650H also incorporates user-friendly technologies for enhanced maneuverability. Its large, pneumatic wheels provide stability and traction across various terrains, including wet grass and uneven surfaces. The unique design allows for easy navigation around obstacles, making it ideal for both open lawns and landscaped areas.

Safety and ease of use are paramount in the construction of the MV650H. The machine features an ergonomic handle that ensures comfort during operation, and the intuitive control layout makes it accessible for users of all experience levels. Additionally, the vacuum's compact size allows for easy storage when not in use.

Overall, the Billy Goat MV650H is a powerful and efficient leaf and debris vacuum, perfect for homeowners and professionals alike. Its combination of a robust Honda engine, high-capacity collection, and user-friendly design makes it a top choice for those seeking effective yard maintenance solutions. Whether you’re tackling fall leaves or spring clean-up, the MV650H stands out as a reliable partner in outdoor maintenance.