Binatone CAPRICE 600 manual Troubleshooting continue

Troubleshooting continue...

	The caller may have withheld their number by
	dialing 141. Or they may be calling from a network
	that does not transmit the Caller Display (for
	example, it may be an international call).
	Be sure to wait until the second ring before
	answering.
	Answering Machine
“The machine won’t	The machine’s memory may be full. You need to
record any	delete enough recorded messages to free at least
messages”	one minute recording time. Or you can delete all
	recorded messages to make room for new ones
	Make sure the machine is switched on - the
	MESSAGE light should be on.
	Make sure you have not selected OGM2 - with
	OGM2 selected, callers cannot leave messages
	(see page 20).
“Remote operation	Make sure you are using the correct remote
doesn’t work.”	security code.
	Check that you are using a suitable tone-dialling
	phone. Some cordless or mobile phones do not
	generate continuous tones and so are not ideal for
	remote operation.
	Don’t leave more than 10 seconds between key
	presses; otherwise, your call will be cut off.
	Using your Caprice 600 on a PBX
“Last Number Redial	When you first make a call, try pressing the REDIAL/
and/or memory	PAUSE button for a pause between the outside line
dialing don’t work	access digit (e.g. 9) and the telephone number.
on a PBX.	You should later be able to redial the number.
	When storing numbers in memory, you can include
	the outside line access digit (e.g. 9) with each
	number.

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

30