ENGLISH
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS.
With proper care and use, this Bionaire® air purifier will give you fresh, clean air for many years.
NOTE: Before reading these instructions, please unfold the back page for the corresponding illustrations
DESCRIPTIONS
See Fig 1/2/3
A.Inlet Grill
B.Washable Foam Pre-filter
C.Speed Control
D.Filtered Air Outlet
E.Ioniser Control
F.Ioniser Light
G.HEPA Filter
H.Power Cord
SAFETY PRECAUTION
Carefully read and retain all instructions before using the air purifier.
•To avoid fire or shock hazard, check that the voltage on the product corresponds
to your electricity supply and plug directly into an electrical outlet.
•To avoid fire hazard, never put the cord under rugs, or near any heat source.
•Carefully discard any plastic wrapping that was used for the packaging.
•Do not use the air purifier outside.
•Do not place the unit near any heat source or in direct sunlight.
•Always unplug the air purifier before
removing the grill, changing the filters, cleaning the air purifier or whenever it is not in use.
•Do not use in or around water or any other liquids. Do not attempt to wash the
unit under running water
•Use appliance only for intended household use as described in this manual
•Ensure that all air openings are not restricted or covered in any way
•Do not place anything on top of the unit
•Never insert any object into any openings
•Do not use the air purifier if any part is missing or damaged in any way.
•Do not attempt to repair or adjust any mechanical functions of this unit. If the
unit becomes damaged return to the place of purchase or phone the helpline number on the back of this leaflet.
•If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid hazard
•The air purifier contains no user serviceable parts and should the product suffer damage or breakdown it must be returned to the manufacturer or its service agent.
•Should the air purifier stop working, first check the fuse in the plug (UK only) or fuse/circuit breaker at the distribution board is operating, before contacting the manufacturer or service agent.
HOW THE AIR PURIFIER WORKS
Dirty, dust laden air is drawn through the front of the air purifier and through the multi-stage filtration system.
1.The carbon filter will help clear odours making the air cleaner and fresher.
2.The HEPA filter entraps 99% of all smaller visible and non-visible particles down to 0.3 microns in size.
PRODUCT FEATURES
Quiet operation -
Your air purifier has been designed to be unobtrusive around the home and to be very quiet. The motor provides quiet performance and durability necessary for continuous use.
Dual position -
The unit can be placed either upright or on its side, flush against the wall. When positioning the unit be sure that the air inlet grill, filters and air outlet grill are not blocked, to ensure maximum air flow.
Ioniser -
Your Bionaire® Air Purifier has an independently controlled ioniser, which when turned on, releases negative ions into the outgoing filtered air. Ions are tiny particles that carry either a positive or negative charge. These ions exist naturally all around us in the air, water and ground. Both positive and negative ions are colourless, odourless and completely harmless.
Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles, such as dust, pollen, smoke and pet dander to form larger particles that are then more readily captured by the filter system, or they may be attracted to positively charged surfaces like walls or floors.
You may also note, after extended use, that dust may have collected around the grills or front panel. This is from the ionisation effect caused by the negative ions exiting from the air outlet. This dust does not come from the air output, but is drawn out of the uncleaned air going past the air outlet. This is additional evidence of the air cleaning effectiveness of negative ions. The dust can be
2
easily removed with a clean, dampened cloth or soft brush.
Please note: it is important to change the HEPA filter at recommended intervals. Using the ioniser in conjunction with dirty filters may result in dirty particles exiting the air purifier and being attracted to walls, carpets, furniture and other household objects, These dirty particles may prove very difficult to remove.
PRE-OPERATING INSTRUCTIONS
1.After removing the unit from the box, remove the plastic covering from the unit.
2.Select a firm level place where there are no obstructions to the air inlet(front grill) or filtered air outlet(top of the unit)
3.Remove the front grill by pulling the grill towards you (see fig 2)
4.Remove the HEPA filter by gripping on both sides and pulling forward.
5.Remove protective plastic bag from the filter cartridge. The filter clip can only be attached to the hang tabs on the filter one way (see fig 3). The filter clip should easily slide onto the filter hang tabs. Do not use force whilst attaching the filter clip to the filter. Align the clip on the top of your HEPA filter with the rails on the inside of the unit.
Note: The pleated material and rubber gasket should be facing towards the unit when applied.
6.Replace the front grill by sliding back on to the unit. Make sure that it snaps securely into position (the grill only goes on one way) NOTE: Do not point outlet towards wall.
OPERATING
1.Plug into a suitable 220 – 240V electrical outlet.
2.Select the required operating speed:
Hi (III), Medium (II), Low (I) by sliding the switch to the appropriate setting
3.To release negative ions into the filtered air slide the ioniser button to ON. The amber light will illuminate.
4.The ioniser will not work unless the unit is running.
5.For optimum air filtration, it is recommended to operate the air purifier continuously. Its rugged motor is designed to give many years of service.
6.For continuous use it is recommended to operate the air purifier at the medium (II) setting. For quieter operation or use in a bedroom, select the Low (I) setting. When high levels of air polution are present, select the HI (III)setting to quickly circulate clean filtered air.
CLEANING AND MAINTENANCE
1.Turn the air purifier off and unplug it before cleaning.
2.The outside of the air purifier can be cleaned with a soft, clean dampened cloth.
3.The filtered air outlet on the top of the unit can be cleaned of dust with a small, soft brush.
4.If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down.
FILTER REPLACEMENT IMPORTANT: IN ORDER TO RETAIN THE EFFICIENCY OF YOUR AIR PURIFIER, THE HEPA FILTER NEEDS TO BE CHANGED EVERY 6 MONTHS.
1.Every few weeks check the condition of the pre- filter.
2.Remove the front grill. If the foam pre-filter has collected a noticeable amount of dust, remove it from the inlet of the grill and wash it in warm soapy water. Rinse and dry the pre-filter thoroughly before replacing it in the inlet of the grill.
3.With the front grill removed, remove the HEPA cartridge and dispose in the dustbin. DO NOT try to wash and re-use the HEPA filter Replace with a new HEPA filter - HAPF30 removing the protective plastic bag before inserting into the air purifier.
4.Align the clips on the top of your HEPA filter with the rails on the inside of the unit. Gently slide the filter onto the rails.
5.The filter clip should easily slide onto the filter hang tabs. Do not use force while attaching the filter clip to the filter.
Align the clip on the top of your HEPA filter with the rails on the inside of the unit.
Note: The pleated material and rubber gasket should be facing towards the unit when applied.
6.Replace the front grill by sliding back on to the unit. Make sure that it snaps securely into position (the grill only goes on one way) NOTE: Do not point outlet towards wall.
REPLACEMENT FILTERS :
HAPF30 HEPA Filter
For UK only - Customer Service Helpline 0800 052 3615
Filter Sales Order Line - 0870 759 9000
SERVICE INSTRUCTIONS
1.Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty. The insides of the unit contain no user serviceable parts. Only qualified personnel should perform all servicing.
2.If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it.
3