BioStar P4M800 manual JUSBV1/JUSBV2 Power Source Headers for USB ports, HOW to Setup Jumpers

P4M800 Pro-M7

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened Pin closed Pin1-2 closed

3.2DETAIL SETTINGS

JUSBV1/JUSBV2: Power Source Headers for USB ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at JUSB1 and JUSBLAN1.

JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).

Pin 2-3 Close:

JUSBV1: USB ports at JUSB1 and JUSBLAN1 are powered by +5V standby voltage.

JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V standby voltage.

		3
		1	3
		1
JUSBV1		Pin 1-2 Close (Default)
	3
	1
		3
		1	3
JUSBV2		1
1	3	Pin 2-3 Close
Note:

In order to support this function “Power-On system via USB device,” “JUSBV1/ JUSBV2” jumper cap should be placed on Pin 2-3 individually.

12