HP D3K72UT D3K72UT#ABA 5Computer Setup-Power, Option Description Hardware Power, Management

Computer Setup—Power

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 3-5Computer Setup—Power

Option	Description
Hardware Power	SATA Power Management – Enables or disables SATA bus and/or device power management.
Management	Default is enabled.
	S5 Maximum Power Savings – Turns off power to all nonessential hardware when system is off to
	meet EUP Lot 6 requirement of less than 1 Watt power usage. Default is enabled.
	S5 Wake on LAN (enable/disable).
	● To disable Wake on LAN during the off state (S5), use the arrow (left and right) keys to
	select the Advanced > Device Options menu and set the S5 Wake on LAN feature to
	Disable. This obtains the lowest power consumption available on the computer during S5. It
	does not affect the ability of the computer to Wake on LAN from suspend or hibernation, but
	will prevent it from waking from S5 via the network. It does not affect operation of the
	network connection while the computer is on.
	● If a network connection is not required, completely disable the network controller (NIC) by
	using the arrow (left and right) keys to select the Security > Device Security menu. Set the
	Network Controller option to Device Hidden. This prevents the network controller from being
	used by the operating system and reduces the power used by the computer in S5.
Thermal	CPU Fan Speed (view only) – Lets you view fan speed.
	System Fan Speed (view only) – Lets you view fan speed.

Computer Setup (F10) Utilities 15