HP D3K72UT D3K72UT#ABA manual

8.To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board.

Figure 8-12Installing an expansion card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot.

9.Reattach the bracket to the back of the computer Figure 8-13Replacing the expansion slot bracket

92 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis