5.Disconnect the power switch cable from the front USB assembly cable. Figure 8-24Disconnecting the power switch cable

6.From the outside, front of the computer, press the tab on the right side of the power switch (1) to disengage it from the chassis.

7.Rotate the power switch right to left (2), and then remove it from the computer (3) while routing the cable through the hole in the front of the chassis.

Figure 8-25Removing the power switch

To install the power switch, reverse the removal procedure.

Power Switch 103

Page 113
Image 113
HP D3K72UT D3K72UT#ABA manual