HP D3K72UT D3K72UT#ABA manual Cannot format diskette Cause Solution, Storage Storage Options

Cannot format diskette.

Cause	Solution
Invalid media reported.	When formatting a disk in MS-DOS, you may need to specify
	diskette capacity. For example, to format a 1.44-MB diskette,
	type the following command at the MS-DOS prompt:

	FORMAT A: /F:1440
Disk may be write-protected.	Open the locking device on the diskette.
Legacy diskette writes are disabled in Computer Setup.	Enter Computer Setup and enable Legacy Diskette Write in
	Storage > Storage Options.
A problem has occurred with a disk transaction.
Cause	Solution
The directory structure is bad, or there is a problem with a	Right-click Start, click Explore, and right-click on a drive.
file.	Select Properties then select the Tools tab. Under Error-
	checking click Check Now.
Diskette drive cannot read a diskette.
Cause	Solution
You are using the wrong diskette type for the drive type.	Check the type of drive that you are using and use the
	correct diskette type.
You are reading the wrong drive.	Check the drive letter in the path statement.
Diskette is damaged.	Replace the diskette with a new one.
“Invalid system disk” message is displayed.
Cause	Solution
A diskette that does not contain the system files needed to	When drive activity stops, remove the diskette and press the
start the computer has been inserted in the drive.	Spacebar. The computer should start up.
Diskette error has occurred.	Restart the computer by pressing the power button.
Cannot Boot to Diskette.
Cause	Solution
Diskette is not bootable.	Replace with a bootable diskette.

Solving Diskette Problems 149