HP D3K72UT D3K72UT#ABA manual

Models: D3K72UT D3K72UT#ABA

1 201
Download 201 pages 23.5 Kb
Page 120
Image 120

4.Disconnect the cable from the system board (1), lift the fan sink from atop the processor (2) and set it on its side to keep from contaminating the work area with thermal grease.

Figure 8-33Removing the fan sink

When reinstalling the fan sink, make sure that its bottom has been cleaned with an alcohol wipe and fresh thermal grease has been applied to the top of the processor.

CAUTION: Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the heat sink on the processor to avoid damage that could require replacing the system board.

Failure to install the fan duct may cause the computer to overheat.

110 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis

Page 120
Image 120
HP D3K72UT D3K72UT#ABA manual