HP D3K72UT D3K72UT#ABA manual 4Computer Setup-Security

Computer Setup—Security

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 3-4Computer Setup—Security

Option	Description
Setup Password	Allows you to set and enable a setup (administrator) password.
	NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
	ROM, and make changes to certain plug and play settings under Windows.
	If a setup password is set, the computer requires that you enter it before accessing the following
	functions: Boot Menu (F9), Computer Setup (F10), System Recovery (F11), Network Boot (F12).
	See the Desktop Management Guide for more information.
Power-On Password	Allows you to set and enable a power-on password. The power-on password prompt appears
	after a power cycle. If the user does not enter the correct power-on password, the unit will not
	boot.
	NOTE: This selection will only appear when at least one drive that supports the DriveLock
	feature is attached to the system.
	See the Desktop Management Guide for more information.
Password Options	Allows you to enable/disable:
(This selection appears	●	Lock Legacy Resources (appears if a setup password is set). Default is enabled.
only if a power-on	●	Setup Browse Mode (appears if a setup password is set) (allows viewing, but not changing,
password or setup
password is set.)		the F10 Setup Options without entering setup password). Default is enabled.
	● Password prompt on F9, F11, & F12 (allows access to menus without entering setup
		password). Default is enabled.
	● Network Server Mode (appears if a power-on password is set). Default is disabled.
	See the Desktop Management Guide for more information.
Device Security	Allows you to set Device Available/Device Hidden (default is Device Available) for:
	●	System audio
	● Serial ports (some models)
	● Parallel port (some models)
	●	Network controller
		NOTE: You must disable AMT before trying to hide the network controller.
	●	SATA0
	●	SATA1
	●	SATA2
	●	SATA3

12 Chapter 3 Computer Setup (F10) Utility