Bissell 1672 How To Begin Deep Cleaning Carpet, Deep Cleaning Upholstery, Cleaning Bare Floors

Sweep before starting.

Remove old wax before cleaning.

Leave an exit path.

Allow at least 1/2 hour drying time.

The Big Green is not recommended for cleaning wood floors.

How To Begin

Deep Cleaning Carpet

	Vacuum carpet (see page 10, HOW TO DRY VACUUM).
1.
	Decide where to begin — and end — your job. Clean in
2.
	3’ X 4’ sections, starting in areas farthest from exit. Plan
	to leave a path open to empty collection tank and
	replenish filling cavity.
	Carpeting will dry in two to four hours, depending on
3.
	carpet style and air circulation in room. A floor fan
	speeds drying.
	Plan activities to give carpet time to dry.
4.
	Replace furniture on damp carpeting by placing waxed
5.
	paper under legs until floor dries completely.

Deep Cleaning Upholstery

Check manufacturer’s tag before cleaning. “W” or “WS”

1. on the tag means you can use your Big Green. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed.

If manufacturer’s tag is missing or not coded, check with

2. your furniture dealer.

If possible, check upholstery stuffing. Colored stuffing

3. may bleed through fabric when wet.

Cleaning Bare Floors

1.

Use only Bissell® Floor Care cleaning solution on no-wax

2. floors. Never use Bissell® Carpet Cleaner or other carpet cleaners on bare floors.

3.

4.

5.

6.

Tip:

Always vacuum before you clean. If possible, move large furniture aside. But if it’s not possible to move your furniture, don’t worry

- your Big Green features a clean- ing wand that easily maneuvers under and around furniture.

Tip:

Deep cleaning carpeting and upholstery regularly can reduce dust and allergens in your home.

7