Woods Equipment L306 K50 manual Blades, Uneven Terrain, Cleaning, After Each Use

Figure 2. Mowing Pattern

BLADES

Mowers are shipped with standard suction blades which are designed for normal mowing conditions.

Optional low suction blades are available for use in sandy areas.

UNEVEN TERRAIN

A WARNING

■Be careful when operating tractor and mower on uneven ground. In extremely uneven terrain, rear wheel weights should be used to improve trac- tion.

The addition of rear tire weights and liquid ballast in rear tires will increase tractor stability.

Pass diagonally through sharp dips and avoid sharp drops to prevent “hanging up” the tractor and mower. Practice will improve your skills in maneuvering rough terrain.

Avoid sudden starts and stops when traveling up or down hill. Always mow down steep slopes, never up or across the face.

Slow down on sharp turns and slopes to prevent tip- ping or loss of control.

CLEANING

After Each Use

●Remove large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Inspect machine and replace worn or damaged parts.

●Replace any safety decals that are missing or not readable.

Periodically or Before Extended Storage

●Clean large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Remove the remainder using a low-pressure water spray.

1.Be careful when spraying near scratched or torn safety decals or near edges of decals as water spray can peel decal off surface.

2.Be careful when spraying near chipped or scratched paint as water spray can lift paint.

3.If a pressure washer is used, follow the advice of the pressure washer manufacturer.

●Inspect machine and replace worn or damaged parts.

●Sand down scratches and the edges of areas of missing paint and coat with Woods spray paint of matching color (purchase from your Woods dealer).

●Replace any safety decals that are missing or not readable (supplied free by your Woods dealer). See Safety Decals section for location drawing.

32695 (Rev. 11/17/2006) Operation 11