1.Blade Wrench
2.Shoulder Washer
3.Clutch Disc
4.Blade Stop
5.Blade
6.Shim Washer
7.Cup Washers
8.Sleeve
9.Washer (special)
10.Bolt (special)
Figure 3. Blade Assembly
Figure 4. Blade Sharpening
LUBRICATION
A CAUTION
■Always wear safety glasses and ear protection when performing service or maintenance functions that could cause injury to eyes or ears.
See Figure 5 and Figure 6. Be familiar with and follow all safety rules and decals.
A WARNING
■Lower mower to ground, shut off tractor engine and remove key before servicing.
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The accompanying illustrations give the lubrication points and frequency. The hours are based on normal operat- ing conditions. Severe or unusual conditions may require more frequent lubrication.
Use a SAE
IMPORTANT
■Do not over grease blade spindles. Excess grease could be transferred to the belt and cause slippage and premature failure.
Figure 5. Spindle Lubrication
Figure 6. Caster Lubrication
32695 (Rev. 11/17/2006) | Owner Service 13 |
|
|