Canon NP6218 C. Registration Roller Assembly, Detaching the Registration Clutch, 5-31

CHAPTER 5 PICK-UP/FEEDING SYSTEM

C. Registration Roller Assembly

1. Detaching the Registration Clutch

1)Detach the connector cover or the lattice connector

2)Remove the clip ring q, and disconnect the connector w; then, detach the registration clutch e.

Figure 5-727

2. Detaching the Upper Registration Roller

1)Detach the registration clutch. (See “1. Detaching the Registration Clutch on p. 5- 29.”)

2)Remove the spring q (front) and spring w (rear).

Figure 5-728

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-31