Canon NP6218, FY8-13EX-000 8-30, If the ROM IC6 !2 is not mounted, you need not mount it

CHAPTER 8 INSTALLATION

6)Remove the slack from the cable between the copier and the RDD; keep the excess cable to the RDD using the harness band !0.

!0

Fig. 8-708

7)Shift bit 4 of the DIP switch 2 !1to ON so that the communication mode between the RDD and the copier is IPC mode.

	8
		7
!1		6
		5
		4
		3
		2
	1

	LED1 LED2 LED3
	2	6
1		1
	SW2	SW3
LED5		SW4
LED6
LED4
	IC6

BAT1

1

2

CN4

SW1

CN3 CN2

Fig. 8-709

8)If the ROM IC6 !2is mounted on the RDD’s PCB, shift bit 7 of the DIP switch 2 !3to ON; otherwise, shift bit 7 of the DIP switch 2 to OFF.

Note:

1.If the ROM (IC6; !2) is not mounted, you need not mount it.

2.If you are mounting or replacing the ROM (IC6; !2for upgrading the RDD, be sure to shift bit 7 of the DIP switch 2 !3to ON.

8-30 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)