Canon NP6218, FY8-13EX-000 service manual Set the paper size plates selected in step

CHAPTER 8 INSTALLATION

6) Set the paper size plates selected in step 4).

After setting the size plate, make sure it corresponds to the paper size you have selected.

Figure 8-205

Caution:

If you are setting the plate for the position representing the universal (u) cassette, you must perform the work described for “universal cassette paper size setting (505); see p. 10-44.

■Points to Note When Handling the Photosensitive Drum after Installation

The copier’s photosensitive drum is highly susceptible to light; mere exposure to

room light can affect the drum enough to produce white spots or black lines on the copies. Keep the following in mind:

•Do not spend more than 5 min when removing jams.

•After detaching the drum unit from the copier during servicing work, be sure to protect it in the light-blocking sheet that came with the drum or fresh copy paper, and place the drum in a dark place.

Do not touch the photosensitive drum or primary charging roller.

If you have soiled the surface of the drum inadvertently, wipe it using a flannel cloth coated with toner; do not use paper, lint-free or otherwise.

Do not dry wipe or use solvent to clean the drum.

8-12 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)