Canon FY8-13EX-000, NP6218 service manual B. Turning On the Copier

CHAPTER 8 INSTALLATION

B. Turning On the Copier

Step	Work				Remarks
1	Connect the power plug to the
				Caution:
	power outlet.
				• Make sure that the power outlet is the rating
			±10%.
2	Turn on the power switch.	Make sure that the Add Paper message flashes.
		• Press the keypad and the Clear key to make
			sure that the copy count indication is correct.
3	Turn off the power switch.
4	Supply toner according to the
				Caution:
	instructions given on the toner
				When turning the toner cartridge counterclock-
	supply label attached behind
				wise to set it, you must fully turn it until it is
	the front door.
				locked; the developing assembly can cause a
				fault if you operate the machine without locking
				the cartridge.
5	Release the developing
	assembly by the developing
	assembly locking lever.
6	Install the drum unit.	See “D. Attaching the Drum Unit.”
7	Lock the developing assembly,
	and close the copier’s top unit.
8	Insert the door switch activator
	into the door switch, and turn
	on the power.

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-5